Dana 44 Knuckle

#3
Any other known differances? I know that the tie rod isn't over the knuckle on Fords.
they use a 5 bolt spindle where as chevy and jeep use a 6 bolt spindle, and require different brake backing plates and calipers.

knuckles20.jpg

just checked, the center hole on the ford knuckle is 4.120"
 
Last edited:
#8
Depends on the cost of either.. I know the 60 is gonna open up a whole nuther' can of worms...new locker, gears, chromo's, etc.. where as the ford assembly could be had cheaper i'm sure.. but look into the future as well. do you plan on running 39's ever on the TJ like you mentioned at harlan? if not i say keep the d44 and start your buggy using your tons..

I know you were wanting to keep the flat top for the steering you have, so you could get some stock knuckles and send them off..
http://www.cutthroat4x4.com/catalog/product_info.php?products_id=70
 
Last edited:
Top