So bought a Viair 450P compressor for filling tires and such on trips after borrowing other peoples forever. It works well, I used it this past weekend at OSCAR. One thing I found was that because this is an automatic air compressor it comes with a normally closed fill gun with gauge. This sounds great because the compressor automatically shuts off when it reaches a certain psi. But there is no way to hold the trigger on the gun to fill the tire. So in order to fill the tire you have to sit by the tire for 2 minutes for each tire.
It has this gun:
https://www.viaircorp.com/inflation/inflation-gun-160-psi
My initial thought was I can get a spring clamp from lowes or harbor freight and just keep it with my compressor. like this:
https://www.harborfreight.com/2-12-in-nylon-spring-clamp-69290.html
Is there anything I'm missing on this? Does anyone have any crafty ideas to let me not babysit this thing while its inflating. I figure I can figure out the time it takes to go from 10 to 30 and just use that as a general idea in the future.
It has this gun:
https://www.viaircorp.com/inflation/inflation-gun-160-psi

My initial thought was I can get a spring clamp from lowes or harbor freight and just keep it with my compressor. like this:
https://www.harborfreight.com/2-12-in-nylon-spring-clamp-69290.html

Is there anything I'm missing on this? Does anyone have any crafty ideas to let me not babysit this thing while its inflating. I figure I can figure out the time it takes to go from 10 to 30 and just use that as a general idea in the future.