Guzzy Build

So, after the poker run, I think I have confirmed that its not the rear main seal or oil pan gasket. The oil coming out is still crystal clear. Looks like the front input seal on the transmission that I replaced, or the front input retainer is leaking. Time to tear it down. I forgot to grab that transmission jack back from @LBarr2002 last weekend....:mech:
 
I found that the oil pan gasket had a few small hair line cracks in it near the back corners, It didnt look like the rear main was the problem. I replaced the oil pan gasket and put a little bit of ultra black gasket maker on the 4 points of the oil pan this time that we left out last time.

I also trimmed the skid plate, as it tried to play can-opener with my front driveshaft at full droop.
 
While i had the slave cylinder out I found that it was leaking some too, I swear I gotta be getting close to the end. There isn’t much left to replace.
 
Top