Need to unclutter some space, so the following stuff needs to go. Everything is located in Columbia, SC, I am willing to ship on the buyers dime, and accept PayPal. PM with questions
JK stuff:
Teraflex 4" JKU coils, or 6" on a 2 dr. Springs are a little over a year old and have never showed any signs of sagging. Coils part number are 1853400 for the fronts and 1854400 for the rears. $300
JKU (4 dr) stock rubicon sliders. These came off of my 08 JKU and are basically new less having about 2 inches trimmed off of the rear of each slider in order to properly clear larger tires. Includes the hardware less the nutsets that are in the bottom of the tub: $150
Currie 2.25" front aluminum spacers. These are the spacers that come with currie's front leveling kit: $40
The spacers are the ones without the centering nubs in this pic.
Rubicon Express rear trac bar bracket, came with RE 3.5" superflex kit and includes hardware: $40
Also have the following off of an 08 JKU rubicon, PM for pricing: stock suspension which includes springs, all 8 control arms, front and rear shocks, and front and rear trac bars, stock front and rear bumpers, stock spare tire carrier, stock front and rear driveshafts, stock front and rear 4.10 R&Ps, factory tow hitch, front calipers and stock calipers, stock master cylinder, front and rear factory flares, and probably a few more odds and ends, so just ask.
TJ stuff:
TNT 77.5-79 hp 60 full truss with TJ coil buckets and OTK trac bar mount. Includes the matching trac bar. This truss was on my rig for about a year and has a single upper link mount frenched into the truss. The coil buckets have been moved back about 2"s to compensate for a front stretch. Only misc bracketry not removed is 2 tabs welded to the side of the coil buckets that I used for limit straps, but can remove them: $150

JK stuff:
Teraflex 4" JKU coils, or 6" on a 2 dr. Springs are a little over a year old and have never showed any signs of sagging. Coils part number are 1853400 for the fronts and 1854400 for the rears. $300
JKU (4 dr) stock rubicon sliders. These came off of my 08 JKU and are basically new less having about 2 inches trimmed off of the rear of each slider in order to properly clear larger tires. Includes the hardware less the nutsets that are in the bottom of the tub: $150
Currie 2.25" front aluminum spacers. These are the spacers that come with currie's front leveling kit: $40
The spacers are the ones without the centering nubs in this pic.

Rubicon Express rear trac bar bracket, came with RE 3.5" superflex kit and includes hardware: $40
Also have the following off of an 08 JKU rubicon, PM for pricing: stock suspension which includes springs, all 8 control arms, front and rear shocks, and front and rear trac bars, stock front and rear bumpers, stock spare tire carrier, stock front and rear driveshafts, stock front and rear 4.10 R&Ps, factory tow hitch, front calipers and stock calipers, stock master cylinder, front and rear factory flares, and probably a few more odds and ends, so just ask.
TJ stuff:
TNT 77.5-79 hp 60 full truss with TJ coil buckets and OTK trac bar mount. Includes the matching trac bar. This truss was on my rig for about a year and has a single upper link mount frenched into the truss. The coil buckets have been moved back about 2"s to compensate for a front stretch. Only misc bracketry not removed is 2 tabs welded to the side of the coil buckets that I used for limit straps, but can remove them: $150



Last edited: