Jeep XJ Cherokee Built HP30 & D44

#1
I am selling my Jeep XJ Cherokee axles. Front will bolt right up to any TJ or XJ. Rear will need brackets unless used in a stretch application.

Front:
- High pinion Dana 30 out of an 97 Jeep XJ Cherokee
- USA Standard 4.88s
- Aussie Locker
- Stock shafts w/ spares
- JCR 1 Ton over knuckle steering w/ spare tie rod
- TnT Over axle trackbar bracket
- Alloy USA outer tube seals
- JCR Raised Sway bar mounts
- Riddler Diff cover
- Brakes included

IMG_5404_zpsa034d1c8.jpg

Rear
- Dana 44 out of an 89 Jeep MJ Comanche.
- Yukon 4.88s
- Alloy USA Chromoly Shafts w/ spare Chromoly shaft
- Relocated breather tube
- Riddler Diff cover
- Does have leaf brackets for 1-3" of stretch so will need new brackets if putting on a stock XJ

IMG_5403_zps19e2a34c.jpg

Will need after market track bar. May split up. These are still under my Jeep so serious inquiries only. NO TRADES. Asking $2000 for both, $1200 for the front or $1000 for the rear. All offers are somewhat negotiable. Located in Greenville, SC. Can drive up to an hour to meet for a sale if serious. Call or Txt me at (864) 404-0596
 
Last edited:
Top