I got an aluminum headed 383 chevy I bought to go in my mud truck, I havnt drove Frank in a year so its up F/S. It came out of a buggy in alabama, he upgraded to a LS eng. Looking for $1850 or trade for set of cucv/built chevy one tons. I have it on stand in my shop, can hear run.
complete motor from intake to oil pan
heads are only a year old and are procomp 64cc chamber 190cc runners with 202/160 valves and z28 springs
cam is a small base circle from doug herbert and off the top of my head is a 462/468 lift 219/227 duration 110 centerline
Scat crank
H beam rods 5.7
External balance
Stock balancer
Also comes with flow tech headers
comes with stock water pump, alternator and oil pan
has edelbrock aluminum dual plane intake
1.5 ratio Aluminum roller tip rockers
chrome valve covers
chrome breather
hei distibutor
motor comes complete ready to run except carb
holds great oil pressure at idle and rev. hold around 25-30 when hot at idle and jumps to 60 when hot
Link to vid before he pulled it from buggy
[video]http://s526.photobucket.com/user/Whiten_photos/media/IMG950171_zpsb6bc14e5.mp4.html[/video]
complete motor from intake to oil pan
heads are only a year old and are procomp 64cc chamber 190cc runners with 202/160 valves and z28 springs
cam is a small base circle from doug herbert and off the top of my head is a 462/468 lift 219/227 duration 110 centerline
Scat crank
H beam rods 5.7
External balance
Stock balancer
Also comes with flow tech headers
comes with stock water pump, alternator and oil pan
has edelbrock aluminum dual plane intake
1.5 ratio Aluminum roller tip rockers
chrome valve covers
chrome breather
hei distibutor
motor comes complete ready to run except carb
holds great oil pressure at idle and rev. hold around 25-30 when hot at idle and jumps to 60 when hot
Link to vid before he pulled it from buggy
[video]http://s526.photobucket.com/user/Whiten_photos/media/IMG950171_zpsb6bc14e5.mp4.html[/video]
Last edited: