Offroad Teardrop V2.0

#25
Got back from the trip and noticed I had a little bit of new camber on the trailer. Jacked it up and found the pivot bushings are worn out. Called Timbren yesterday and they confirmed it looked worn out, but said it shouldn't be with only 10k miles on it. They are sending me an updated set of control arms free of charge to fix it up.

hopefully the new design will fix the problem for a long while.

 
#26
Timbren sent me both swingarms and I replaced them last fall. We’ve been rocking and rolling in this thing since then.

I did notice that I need to tweak the alignment of the spindles after I installed the new arms. The spindle bolts onto the arm and has some room for alignment.

update photo dump from recent trips, wow I have been slacking



FAD043AD-CB41-4248-A3B2-E86901A38932.jpeg
59FE6BE2-AF50-49CC-AFBC-077CD10F1B21.jpeg
9B2AEDCC-C40A-4505-897D-58EABCAA9239.jpeg
1A95F77C-125A-473B-92CB-0BF61BCCC266.jpeg
2A4D5D0B-1303-4A2D-A64A-0FB34650AEE6.jpeg
C76DA194-9C92-4BD8-81DB-079525DB5564.jpeg
D537B7FF-2565-4A79-A7FB-7404459C8396.jpeg
2CDC47AD-1F9A-4E53-9512-4DF18997CA8B.jpeg
18F2E3C7-0C1C-4642-AAA0-5895C7D56747.jpeg
BF09FA20-443E-44DE-8461-20D933752E94.jpeg
 
Top