What setup are you running?

#1
Basically I was bored at work and decided to type out what all i have on the wraith . So thought it would be cool to share what your setup is so poeple can ask opinions about different parts, I know i bought a few parts i wish i would have know better when i first got into rc's.

• Mamba max pro
• Tekin pro4 3300
• Futaba 4pl tx/rx
• Castle Creations BEC
• Hitec 7955 servo
• Gmade shocks
• 2.2 pitbull rock beast II with Crawler Innovations foams
• Rc4wd aluminum beadlocks-
• Vanquish front currie housing
• Vanquish rear currie housing
• Vanquish truss front and rear
• Vanquish full link set
• Vanquish tie rod and drag link
• Vanquish knuckles
• Vanquish chubs
• Vanquish lockouts
• Vanquish front locker
• Vanquish rear locker
• Vanquish vvd front axle shafts
• Vanquish CMS
• Vanquish bearing caps front and rear
• Vanquish panhard kit
• Titanium rear axle shafts
• HR metal transmission housing
• All Robinson Racing transmission gears
• Axial HD overdrive gears in front axle
• Axial HD underdrive gears in rear axle
• MIP drive shafts
• Rubi Wraith Body
• Axial anodized machines motor plate
• 32p spur gear
• 5mm bore 32p pinion
image-52.jpg
image-56.jpg
 
Last edited:
#2
Blacrubi Wraith

• Mamba max pro
• Tekin pro4 3300
• 4s Skylipo 2650 Batt
• Castle Creations BEC
• Hitec 7950 servo
• Futaba 4pl tx/rx
• 2.2 pitbull rock beast II with Crawler Innovations foams
• Vanquish SLW V1 Black Beadlocks
• Vanquish full link set
• Vanquish tie rod and drag link
• Vanquish knuckles
• Vanquish chubs
• Vanquish front locker
• Vanquish rear locker
• Vanquish vvd front axle shafts
• Vanquish 3D diff covers front and rear
• All Robinson Racing transmission gears
• Axial HD gears front and rear
• MIP drive shafts
• Rubi Wraith Body
• Axial anodized machines motor plate
• Fast Eddy Bearings
• 32p 60t spur gear
• 5mm 32p 15t pinion

wt2_zpse84c32af.jpg
 
Last edited:
#3
Hmmm that list looks familiar lol, looks good chad. Our is almost identical except the axle housings I like your taste haha
 
Last edited:
#5
Cannonfab's mud digger

1.9 cut boggers
Chinese special esc
Chinese special receiver
Chinese special remote
Stock wraith servo
Beat to hell Scx10 frame
Offroadsc honcho body
Axial metal cs.
Bent Axial aluminum links
Chinese special 200 turn motor
1 stock honcho slider



Has a tendency to go in the mud after it gets a little juiced up.

No pics with new body
ImageUploadedByTapatalk1366680217.053540.jpg
ImageUploadedByTapatalk1366680271.921060.jpg
 
#6
• Mamba max pro
• Tekin ROC 412 1800
• Losi Spectrum tx/rx
• Castle Creations BEC
• Hobbico CS-170 servo
• 1.9 pitbull rock beast with RC4wd Irok foams
• Axial 1.9 beadlocks with mthead rings
• wraith knuckles and c-hubs on front axle with beef tubes
• All Robinson Racing transmission gears
• Axial WB8 Driveshafts
• GCM Transfer Case
• Newbright TJ body
• Robinson Racing pinion
• 3S 1300mAh Lipos


%5BUNSET%5D.jpg

 
Top