SM465/D300 Setup/Hydraulic Clutch setup

#3
$250. The one I am running now leaks. I have another that I just went back throught with new bearings, new front output, and new seals. This one was a spare and has not been run since. I have enough 1310 strap yokes to go on both cases. I also have a 1310 ubolt yoke and a Toyota flange that would be extra.
 
Last edited:
#5
Just wondering if you still have any of this stuff left. I have the sm465 and dana 300, I need all the stuff to put the two together, thanks.
 
#6
Sorry Grady I sold Jimbo the trans, adapter, and a d300 with the input. All I have left now is the bellhousing, clutch, flywheel, starter, and an adapter that can be used to do a 203/205 doubler.
 
#8
The adapter is to bolt a 203 to the SM465. They never made an adapter to bolt a 203 to a 32 spline SM465. You have to use this adapter and drill/tap the face of a 203 for the round pattern. Sorry for the confusion.

I have a 203/205 in my truck but it is not fer sail
 
Top